Brake pad spring for single pin Brembo Goldline 30/34 calipers

Also suitable for some Ducati / Aprilia models. Brembo ref. 98.8248.50

 1 in stock

 20419685 GU20419685 20 41 96 85
 2041 9685 2041.9685 20.41.96.85

Brembo pad pin kit for Brembo caliper fitted to rear, single pin. See BRA33799 for rear calipers with two pins

Brembo ref. 120511611

 1 in stock

 31659181 GU31659181 31 65 91 81
 3165 9181 3165.9181 31.65.91.81

Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder

Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'

 1 in stock

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÜV Rheinland.
  See BRA41652 for bleed valve cover

   1 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Brembo PS 13 handlebar mounted front master cylinder, supplied complete with lever

 This part is available by special order, request a quote

 03660145 GU03660145 03 66 01 45
 0366 0145 0366.0145 03.66.01.45

Polished Brembo aluminium brake lever

Also known as Guzzi ref. 10270652. Brembo ref. 110489431, AP8161262. Can be used instead of adjustable lever BRA81510 for Breva 1200, 1200 Sport, Norge etc... Replaces Guzzi ref. 2B003821 and 2B003041

 This part is due back in stock soon, call 01484 841395 to reserve yours

 03605645 GU03605645 03 60 56 45
 0360 5645 0360.5645 03.60.56.45

Black cast aluminium cap and plastic seal for PS 15 Brembo master cylinder reservoir, this type does not have a level switch. Can be fitted to front or rear PS15 master cylinder reservoirs

This design was originally fitted to 850T, V7 Sport, 750S and S3 but will all fit all listed models. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Pair of replacement anodised alloy pistons for Brembo F05 (P5) calipers. These also fit Grimeca calipers with 32mm pistons

Also used on some Laverdas. BRA19301 for alternative part in stainless steel

 This part is due back in stock soon, call 01484 841395 to reserve yours

 19652300 GU19652300 19 65 23 00
 1965 2300 1965.2300 19.65.23.00

Also fits Benelli 250 TS, Ducati Pantah 500SL

Pair of Brembo 07BB0106 carbon ceramic brake pads with wear indicators for Brembo F05 (P5) and Grimeca calipers

For rear only on Daytona, 1100 Sport, Centauro and V11 Sport. Fronts only on Strada 750 (Brembo equipped). Fits Nevada up until frame no. LK112433 Fits V50 ALL front and rear

 This part is due back in stock soon, call 01484 841395 to reserve yours

27654610-z 27654610 GU27654610 27 65 46 10
 2765 4610 2765.4610 27.65.46.10

Also fits Benelli 125 2C Fronts, Benelli 504 Sport Fronts (1976), Benelli 654 Fronts (1983), Bimota YB7 Rear (1989), Ducati 620 i.e Rear (2001), Ducati Monster 900 i.e. Rear (2002), Ducati Monster 1000 Rear (2003), Ducati Monster 1000 S Rear (2004), Ducati Monster S4 Rear (2001), Moto Morini Dart 350 Rear (1987), Moto Morini 350 Kanguro Rear (1987), Moto Morini Excaliber 350/501 Rear (1993-)

5 hole disc carrier finished in black

We recommend you check your bobbins, spring washers and circlips are OK as these may also require replacement. This is an update to the non floating disc ( 28613300 / 28613301 ) fitted to Lario, T5, SP II, Monza 2, V75 and V35 3

 This part is available by special order, request a quote

 28613770 GU28613770 28 61 37 70
 2861 3770 2861.3770 28.61.37.70